Delock Adapter DC 2.5 x 5.5 mm male > Terminal Block 2 pin

Delock Adapter DC 2.5 x 5.5 mm male > Terminal Block 2 pin This DC to Terminal Block adapter is made for special industrial application e.g. for connecting single wires with open cable heads. It also can be used in the hobby area for example for model railroading. Therefor you can connect various devices with suitable DC power connector to the adapter in order to supply your devices individually with power (depending on the requirements of device)
   
This DC to Terminal Block adapter is made for special industrial application e.g. for connecting single wires with open cable heads. It also can be used in the hobby area for example for model railroading. Therefor you can connect various devices with suitable DC power connector to the adapter in order to supply your devices individually with power (depending on the requirements of device).
Productcode: 1217091

1.557
Levertijd: 3 tot 4 werkdagen

Meer artikelen? Meer korting!
Aantal 1-9: € 7,99Aantal 10-49: € 7,71Aantal 50-249: € 7,03Aantal 250+: € 6,39
€ 7,99 (Incl. 21% BTW)
Productcode: 1217091
In winkelwagen
Koop  1 Artikel  voor € 7,99
Meer informatie over dit product

This DC to Terminal Block adapter is made for special industrial application e.g. for connecting single wires with open cable heads. It also can be used in the hobby area for example for model railroading. Therefor you can connect various devices with suitable DC power connector to the adapter in order to supply your devices individually with power (depending on the requirements of device).

Andere producten in deze categorie
Delock Adapter HDMI-A Stecker > HDMI-A Buchse EDID Emulator Dieser Adapter von Delock emuliert einen Monitor, so dass die Signalquelle auch ohne einen angeschlossenen Bildschirm das Signal nicht abschaltet oder die Auflösung verändert. Der Adapter enthält einen Standardsatz von EDID/DDC Daten, er kann aber auch die Daten eines angeschlossenen Monitors auslesen und speichern.
• Anschlüsse: Eingang: 1 x HDMI-A 19 Pin Stecker Ausgang: 1 x HDMI-A 19 Pin Buchse • Auflösung bis 3840 x 2160 @ 60 Hz (abhängig vom System und der angeschlossenen Hardware) • Benötigt keine externe Stromversorgung • 1 x LED Anzeige • Kunststoffgehäuse • Farbe: schwarz • Maße inkl. Anschluss (LxBxH): ca. 44,0 x 20,5 x 12,5 mm
• EDID Emulator • Bedienungsanleitung
Adapter & Converter
HDMI
€ 12,00
Klantenservice & Informatie